Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Rytec / Part reference

Rytec 0399514: Left drive assembly

Identify the components explicitly listed for the left drive assembly and distinguish its handed parts and source limitations.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Manufacturer identifier: 0399514. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact manual number0399514
IdentificationLeft drive assembly
Serial and revision scopeArctec manual 0315401, revision August 21, 2008. Confirm the exact door serial number and installed assembly with Rytec; the manual warns that product changes and special engineering can change the fitted parts. This is document-based identification, not an installation procedure or universal fitment.
Item 1: 0550016Screw. Table quantity: 1.
Item 2: 0555149Fender washer, 0.25-inch bore and 1-inch outer diameter. Table quantity: 1.
Item 3: 0303445Pulley listed for left drive and left idler. Table quantity: 1.
Item 4: 0555144Wide-flange washer. Table quantity: 1.
Item 5: 0550301Screw. Table quantity: 4.
Item 6: 0399521SEW motor assembly for System 3. Table quantity: 1.
Item 7: 0399541Left drive bracket for the 110-volt blower configuration. Table quantity: 1.
Item 8: 00141028FEIG encoder. Table quantity: 1.
Cross-reference number remains distinctThe head list uses 0399438 for this drive position, but this breakdown names 0399514. No alias or replacement between those numbers is verified. The 110-volt label belongs to the blower bracket configuration; it does not establish the motor voltage.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
00141028

Documented compatibility

From 00141028 to 0399514.

Rytec lists 00141028 in the 0399514 breakdown: feig encoder.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 8, component 00141028, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0303445

Documented compatibility

From 0303445 to 0399514.

Rytec lists 0303445 in the 0399514 breakdown: pulley listed for left drive and left idler.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 3, component 0303445, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0399521

Documented compatibility

From 0399521 to 0399514.

Rytec lists 0399521 in the 0399514 breakdown: sew motor assembly for system 3.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 6, component 0399521, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0399541

Documented compatibility

From 0399541 to 0399514.

Rytec lists 0399541 in the 0399514 breakdown: left drive bracket for the 110-volt blower configuration.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 7, component 0399541, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0550016

Documented compatibility

From 0550016 to 0399514.

Rytec lists 0550016 in the 0399514 breakdown: screw.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 1, component 0550016, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0550301

Documented compatibility

From 0550301 to 0399514.

Rytec lists 0550301 in the 0399514 breakdown: screw.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 4 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 5, component 0550301, quantity 4 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0555144

Documented compatibility

From 0555144 to 0399514.

Rytec lists 0555144 in the 0399514 breakdown: wide-flange washer.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 4, component 0555144, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
0555149

Documented compatibility

From 0555149 to 0399514.

Rytec lists 0555149 in the 0399514 breakdown: fender washer, 0.25-inch bore and 1-inch outer diameter.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Arctec 0315401 (2008-08-21), exact assembly 0399514, printed page 37
  • The single-parent breakdown lists quantity 1 for this component. Confirm the door serial number and exact installed assembly with Rytec. This does not establish interchangeability, a successor or whole-door fitment.
  • Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 43 / printed page 37: Parent 0399514, item 2, component 0555149, quantity 1 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec

Direct replacement paths

No direct successor for 0399514 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: 0399514 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Rytec Arctec owner manual, August 21, 2008Rytec · US · checked 2026-09-13 · 0315401, August 21, 2008

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Rytec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability