Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Rytec / Part reference

Rytec 0899896: heat-lamp mounting assembly components

Identify the documented components of heat-lamp mounting assembly 0899896, with source-specific quantities and configuration limits.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Manufacturer identifier: 0899896. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact printed identifier0899896
View source and citation details
IdentificationLamp mounting assembly; items 20-26 include fixture alternatives
View source and citation details
Serial and revision scopeFast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure.
View source and citation details
Quantity scopeQuantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
Alternative fixture scopeItems 20 and 21 contain alternative brackets and fixtures. Associations below record the explicitly listed scope, not proof that both fixtures ship together or that a complete electrical fixture is supplied in every order. Confirm the actual fixture and serial with Rytec.
View source and citation details
0103220Heat-lamp fixture support. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0299426CH-200 fixture support; unillustrated. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0004110MM-46 heating fixture, 460 V. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0004030CH-200 heating fixture, 230 V; double-lamp variant unillustrated. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0554115Lock washer, #10. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0553088Nut, 10-24. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0551054Fastener, 10-24 by 0.75 in. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0553229Serrated nut, 3/8-16. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details
0550028Fastener, 3/8-16 by 1 in. Source-table quantity: unspecified/as required. Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
View source and citation details

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Read the documented direction and conditions for each pairing.
Equipment or component / relationshipEvidence and conditions
0004030

Documented compatibility

From 0004030 to 0899896.

Conditional

0899896 lists item 21, 0004030: CH-200 heating fixture, 230 V; double-lamp variant unillustrated.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 21. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
  • Rytec Fast-Fold standard manual, May 14, 2008R0115564, May 14, 2008, PDF page 47 / printed page 41: 0899896 lists item 21, 0004030: CH-200 heating fixture, 230 V; double-lamp variant unillustrated. · checked 2026-09-13 · R0115564, May 14, 2008 · Rytec
0004110

Documented compatibility

From 0004110 to 0899896.

Conditional

0899896 lists item 21, 0004110: MM-46 heating fixture, 460 V.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 21. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0103220

Documented compatibility

From 0103220 to 0899896.

Conditional

0899896 lists item 20, 0103220: Heat-lamp fixture support.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 20. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0299426

Documented compatibility

From 0299426 to 0899896.

Conditional

0899896 lists item 20, 0299426: CH-200 fixture support; unillustrated.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 20. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
  • Rytec Fast-Fold standard manual, May 14, 2008R0115564, May 14, 2008, PDF page 47 / printed page 41: 0899896 lists item 20, 0299426: CH-200 fixture support; unillustrated. · checked 2026-09-13 · R0115564, May 14, 2008 · Rytec
0550028

Documented compatibility

From 0550028 to 0899896.

Conditional

0899896 lists item 26, 0550028: Fastener, 3/8-16 by 1 in.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 26. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0551054

Documented compatibility

From 0551054 to 0899896.

Conditional

0899896 lists item 24, 0551054: Fastener, 10-24 by 0.75 in.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 24. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0553088

Documented compatibility

From 0553088 to 0899896.

Conditional

0899896 lists item 23, 0553088: Nut, 10-24.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 23. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0553229

Documented compatibility

From 0553229 to 0899896.

Conditional

0899896 lists item 25, 0553229: Serrated nut, 3/8-16.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 25. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0554115

Documented compatibility

From 0554115 to 0899896.

Conditional

0899896 lists item 22, 0554115: Lock washer, #10.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold standard configuration, R0115564, revision May 14, 2008. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0899896; item 22. Select the actual MM-46 or CH-200 fixture and its voltage; listed alternatives are not jointly required.
  • Quantities refer to the source breakdown; as-required or blank entries do not establish a fixed order count.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.

Direct replacement paths

No direct successor for 0899896 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Rytec Fast-Fold standard manual, May 14, 2008Rytec · US · checked 2026-09-13 · R0115564, May 14, 2008

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Rytec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.