Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Rytec / Part reference

Rytec R00121083: System 3 keypad components

The printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Manufacturer identifier: R00121083. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact printed identifierR00121083
IdentificationSystem 3 open-close-stop keypad assembly with LEDs; includes items 5-8, 12 and absent item 13
Serial and revision scopePharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure.
Assembly boundaryThe printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.
R00121082Remote membrane keypad. Source-table quantity: 1.
R00111127Enclosure with flanged lid. Source-table quantity: 1.
RPR140000Male eight-pin M12 receptacle with 0.5 metre leads, Turck FS-8-0.5 label. Source-table quantity: 1.
RPR140001Eight-connector straight M12 cable, 10 metres, Turck RKC-8T-10 label. Source-table quantity: 1.
R00111133Seven-position terminal-block connector, not illustrated. Source-table quantity: 1.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
R00111127

Documented compatibility

From R00111127 to R00121083.

R00121083 identifies item 6, R00111127: Enclosure with flanged lid.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Pharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure. Exact parent R00121083. The printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.
  • Only the cited component/configuration association is documented. No whole-door fitment, successor, reverse/transitive inference or electrical interchange.
  • Rytec Pharma Seal manual, December 29, 2014RPR150001, December 29, 2014, PDF page 32 / printed page 26: R00121083 identifies item 6, R00111127: Enclosure with flanged lid. · checked 2026-09-13 · RPR150001, December 29, 2014 · Rytec
R00111133

Documented compatibility

From R00111133 to R00121083.

R00121083 identifies item 12, R00111133: Seven-position terminal-block connector, not illustrated.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Pharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure. Exact parent R00121083. The printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.
  • Only the cited component/configuration association is documented. No whole-door fitment, successor, reverse/transitive inference or electrical interchange.
  • Rytec Pharma Seal manual, December 29, 2014RPR150001, December 29, 2014, PDF page 32 / printed page 26: R00121083 identifies item 12, R00111133: Seven-position terminal-block connector, not illustrated. · checked 2026-09-13 · RPR150001, December 29, 2014 · Rytec
R00121082

Documented compatibility

From R00121082 to R00121083.

R00121083 identifies item 5, R00121082: Remote membrane keypad.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Pharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure. Exact parent R00121083. The printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.
  • Only the cited component/configuration association is documented. No whole-door fitment, successor, reverse/transitive inference or electrical interchange.
  • Rytec Pharma Seal manual, December 29, 2014RPR150001, December 29, 2014, PDF page 32 / printed page 26: R00121083 identifies item 5, R00121082: Remote membrane keypad. · checked 2026-09-13 · RPR150001, December 29, 2014 · Rytec
RPR140000

Documented compatibility

From RPR140000 to R00121083.

R00121083 identifies item 7, RPR140000: Male eight-pin M12 receptacle with 0.5 metre leads, Turck FS-8-0.5 label.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Pharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure. Exact parent R00121083. The printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.
  • Only the cited component/configuration association is documented. No whole-door fitment, successor, reverse/transitive inference or electrical interchange.
  • Rytec Pharma Seal manual, December 29, 2014RPR150001, December 29, 2014, PDF page 32 / printed page 26: R00121083 identifies item 7, RPR140000: Male eight-pin M12 receptacle with 0.5 metre leads, Turck FS-8-0.5 label. · checked 2026-09-13 · RPR150001, December 29, 2014 · Rytec
RPR140001

Documented compatibility

From RPR140001 to R00121083.

R00121083 identifies item 8, RPR140001: Eight-connector straight M12 cable, 10 metres, Turck RKC-8T-10 label.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Pharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure. Exact parent R00121083. The printed contents list names items 5-8, 12 and 13, but item 13 has no row. These five identified components are a partial documented breakdown, not proof of a complete kit. The assembly is explicitly System 3; no compatibility with System 4 is inferred.
  • Only the cited component/configuration association is documented. No whole-door fitment, successor, reverse/transitive inference or electrical interchange.
  • Rytec Pharma Seal manual, December 29, 2014RPR150001, December 29, 2014, PDF page 32 / printed page 26: R00121083 identifies item 8, RPR140001: Eight-connector straight M12 cable, 10 metres, Turck RKC-8T-10 label. · checked 2026-09-13 · RPR150001, December 29, 2014 · Rytec

Direct replacement paths

No direct successor for R00121083 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: R00121083 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Rytec Pharma Seal manual, December 29, 2014Rytec · US · checked 2026-09-13 · RPR150001, December 29, 2014

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Rytec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability