Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Rytec / Part reference

Rytec R07991491: Counterweight pulley

Identify the counterweight pulley breakdown, its directly labelled components and the exact configuration limits in the Clean-Roll manual.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Manufacturer identifier: R07991491. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact printed numberR07991491
IdentificationCounterweight pulley
Serial and revision scopeClean-Roll manual R0715004, revision December 10, 2014. Confirm the exact door serial number and installed configuration with Rytec; equipment changes and special engineering can change the fitted parts. This historical reference does not establish current stock, a successor, whole-door fitment or an installation procedure.
Quantity limitationThe illustrated breakdown does not give numeric quantities. Confirm the required quantity and installed configuration with Rytec; no complete replacement kit is inferred.
R0705116Pulley spacer. Quantity is not stated.
R0705117Pulley bearing spacer. Quantity is not stated.
RS7031002Inside shoulder. Quantity is not stated.
RS550192Shoulder setscrew. Quantity is not stated.
Pulley versus complete counterweightsThe pulley illustration identifies these four components. Separate left/right counterweight assembly labels elsewhere on the page do not establish that every pictured component belongs to both complete assemblies.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
R0705116

Documented compatibility

From R0705116 to R07991491.

The R07991491 illustration labels R0705116: pulley spacer.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R07991491, printed page 27
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
R0705117

Documented compatibility

From R0705117 to R07991491.

The R07991491 illustration labels R0705117: pulley bearing spacer.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R07991491, printed page 27
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
RS550192

Documented compatibility

From RS550192 to R07991491.

The R07991491 illustration labels RS550192: shoulder setscrew.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R07991491, printed page 27
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
RS7031002

Documented compatibility

From RS7031002 to R07991491.

The R07991491 illustration labels RS7031002: inside shoulder.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R07991491, printed page 27
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.

Direct replacement paths

No direct successor for R07991491 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: R07991491 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Rytec Clean-Roll owner manual, December 10, 2014Rytec · US · checked 2026-09-13 · R0715004, December 10, 2014

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Rytec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability