Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Rytec / Part reference

Rytec R1080024-1: Left breakaway assembly

Identify the left breakaway assembly breakdown, its directly labelled components and the exact configuration limits in the Clean-Roll manual.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Manufacturer identifier: R1080024-1. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact printed numberR1080024-1
IdentificationLeft breakaway assembly
Serial and revision scopeClean-Roll manual R0715004, revision December 10, 2014. Confirm the exact door serial number and installed configuration with Rytec; equipment changes and special engineering can change the fitted parts. This historical reference does not establish current stock, a successor, whole-door fitment or an installation procedure.
Quantity limitationThe illustrated breakdown does not give numeric quantities. Confirm the required quantity and installed configuration with Rytec; no complete replacement kit is inferred.
R0705077Middle end block. Quantity is not stated.
RS021062Stainless Allen screw, 8-32 by 1 inch. Quantity is not stated.
R0704062Wobble switch. Quantity is not stated.
R0705072Breakaway tab. Quantity is not stated.
R1080007-1Rear end block, left drive. Quantity is not stated.
RS021031Screw, 8-32. Quantity is not stated.
R0021807Nut, 6-32. Quantity is not stated.
R0705073Bottom-bar end cap. Quantity is not stated.
R0705074Front end block, left drive. Quantity is not stated.
R00111193Wireless battery. Quantity is not stated.
R00111192Battery holder. Quantity is not stated.
Left configuration onlyThe heading identifies the left breakaway assembly. No right-hand assembly number or right-hand component set is established. The battery label gives no voltage or chemistry.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
R00111192

Documented compatibility

From R00111192 to R1080024-1.

The R1080024-1 illustration labels R00111192: battery holder.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R00111192 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R00111193

Documented compatibility

From R00111193 to R1080024-1.

The R1080024-1 illustration labels R00111193: wireless battery.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R00111193 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R0021807

Documented compatibility

From R0021807 to R1080024-1.

The R1080024-1 illustration labels R0021807: nut, 6-32.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R0021807 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R0704062

Documented compatibility

From R0704062 to R1080024-1.

The R1080024-1 illustration labels R0704062: wobble switch.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R0704062 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R0705072

Documented compatibility

From R0705072 to R1080024-1.

The R1080024-1 illustration labels R0705072: breakaway tab.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R0705072 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R0705073

Documented compatibility

From R0705073 to R1080024-1.

The R1080024-1 illustration labels R0705073: bottom-bar end cap.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R0705073 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R0705074

Documented compatibility

From R0705074 to R1080024-1.

The R1080024-1 illustration labels R0705074: front end block, left drive.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R0705074 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R0705077

Documented compatibility

From R0705077 to R1080024-1.

The R1080024-1 illustration labels R0705077: middle end block.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R0705077 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
R1080007-1

Documented compatibility

From R1080007-1 to R1080024-1.

The R1080024-1 illustration labels R1080007-1: rear end block, left drive.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component R1080007-1 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
RS021031

Documented compatibility

From RS021031 to R1080024-1.

The R1080024-1 illustration labels RS021031: screw, 8-32.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component RS021031 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
RS021062

Documented compatibility

From RS021062 to R1080024-1.

The R1080024-1 illustration labels RS021062: stainless allen screw, 8-32 by 1 inch.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Clean-Roll R0715004 (2014-12-10), exact R1080024-1, printed page 34
  • Directly labelled component in this single-parent illustration. Confirm the door serial and installed configuration with Rytec. Quantity is not stated. No successor, reverse relationship, full-door fitment or hardware interchangeability is inferred.
  • Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 40 / printed page 34: left breakaway assembly breakdown, parent R1080024-1, component RS021062 · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec

Direct replacement paths

No direct successor for R1080024-1 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: R1080024-1 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Rytec Clean-Roll owner manual, December 10, 2014Rytec · US · checked 2026-09-13 · R0715004, December 10, 2014

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Rytec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability