Rytec / Part reference
Rytec RPR990034: through-wall brake-release components
The single-parent breakdown lists six component rows. Screw RS021797 is held because the manual disagrees on its length, leaving five documented component associations. Quantities belong to this breakdown. Confirm the installed door serial and mounting configuration.
Match the whole number.
Manufacturer identifier: RPR990034. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- Rytec Pharma Seal manual, December 29, 2014RPR150001, December 29, 2014, PDF page 28 / printed page 22: RPR990034 · checked 2026-09-13 · RPR150001, December 29, 2014 · Rytec
| Exact printed identifier | RPR990034View source and citation details
|
|---|---|
| Identification | Through-wall brake-release assembly, not illustratedView source and citation details
|
| Serial and revision scope | Pharma Seal, RPR150001, revision December 29, 2014. Confirm the door serial and installed configuration with Rytec; customized engineering and later changes can alter fitted parts. This historical identification reference establishes no current availability, successor or installation procedure.View source and citation details
|
| Assembly boundary | The single-parent breakdown lists six component rows. Screw RS021797 is held because the manual disagrees on its length, leaving five documented component associations. Quantities belong to this breakdown. Confirm the installed door serial and mounting configuration.View source and citation details
|
| RWN524C01 | Brake-release lever. Source-table quantity: 1.View source and citation details
|
| RPR020030 | Through-wall brake-release cover. Source-table quantity: 1.View source and citation details
|
| RS553229 | 3/8-16 stainless serrated-flange hex nut. Source-table quantity: 4.View source and citation details
|
| RPR990035 | Mounting-bracket weldment. Source-table quantity: 1.View source and citation details
|
| RPR030017 | Threaded rod. Source-table quantity: 2.View source and citation details
|
| Held fastener | RS021797 is 3/4 inch here but 1/4 inch in the left-cover tables. No exact screw selection is approved.View source and citation details
|
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.
| Equipment or component / relationship | Evidence and conditions |
|---|---|
| RPR020030 Documented compatibility From RPR020030 to RPR990034. | Conditional RPR990034 identifies item 3, RPR020030: Through-wall brake-release cover. Applies only within this source scope
|
| RPR030017 Documented compatibility From RPR030017 to RPR990034. | Conditional RPR990034 identifies item 6, RPR030017: Threaded rod. Applies only within this source scope
|
| RPR990035 Documented compatibility From RPR990035 to RPR990034. | Conditional RPR990034 identifies item 5, RPR990035: Mounting-bracket weldment. Applies only within this source scope
|
| RS553229 Documented compatibility From RS553229 to RPR990034. | Conditional RPR990034 identifies item 4, RS553229: 3/8-16 stainless serrated-flange hex nut. Applies only within this source scope
|
| RWN524C01 Documented compatibility From RWN524C01 to RPR990034. | Conditional RPR990034 identifies item 2, RWN524C01: Brake-release lever. Applies only within this source scope
|
Direct replacement paths
No direct successor for RPR990034 is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- Rytec Pharma Seal manual, December 29, 2014Rytec · US · checked 2026-09-13 · RPR150001, December 29, 2014
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.