Mama Bear
3 weeks ago
The service was fantastic- courteous, knowledgeable and honest.Excerpt from Google review
LiftMaster, Chamberlain, Genie, Wayne Dalton, Clopay, and Amarr.
Amarr / Garage door / Family guide
Use the complete HI or LI identifier to find the right entry, then compare the construction separately from the panel design.
Identifier: Hillcrest and Lincoln. This guide compares a family or related models. Use the exact configuration on your label.
Models covered: HI1000, HI2000, HI3000, HI3138, LI1000, LI2000, LI3000, LI3138. They are separate configurations; compare the applicable facts and documents below.
HI identifies Hillcrest and LI identifies Lincoln. Hillcrest describes stamped carriage-house designs; Lincoln offers traditional and modern steel designs. Retain the full prefix when selecting the family product reference.
For each prefix, the 1000 and 2000 codes share an index entry; 3000 and 3138 have separate entries. Those entries also contain the corresponding codes from the other family, so match every letter and digit.
Both product pages list one-, two- and three-layer choices and polystyrene insulation options. First establish the ordered layer count and insulation; the published insulated range does not apply to every door.
Keep the full code, dimensions, panel and glazing design with a replacement-section enquiry. A similar pattern or shared specification entry does not establish a compatible section.
| Hillcrest: configuration identifiers | HI1000, HI2000, HI3000, HI3138These are family members, not synonyms for an identical configuration.Source: Amarr 3-Part Specifications — residential sections · Residential Sectional Overhead Steel |
|---|---|
| Hillcrest: construction choices | One, two or three layersSource: Amarr Hillcrest — product and resources · Construction / Design |
| Hillcrest: insulation options | 1-3/8-inch or 2-inch polystyreneSource: Amarr Hillcrest — product and resources · Construction / Design |
| Hillcrest: published insulated range | R-6.48 to R-9.05Manufacturer's published R-value terminology; no whole-door U-factor, installed performance or energy savings inferred.Source: Amarr Hillcrest — product and resources · Construction / Design |
| Hillcrest: per-configuration thermal mapping | Not documented in the checked sourceThe reviewed HTML gives a family range; exact model-to-rating mapping has not been verified.Source: Amarr Hillcrest — product and resources · Construction |
| Lincoln: configuration identifiers | LI1000, LI2000, LI3000, LI3138These are family members, not synonyms for an identical configuration.Source: Amarr 3-Part Specifications — residential sections · Residential Sectional Overhead Steel |
| Lincoln: construction choices | One, two or three layersSource: Amarr Lincoln — product and resources · Construction / Design |
| Lincoln: insulation options | 1-3/8-inch or 2-inch polystyreneSource: Amarr Lincoln — product and resources · Construction / Design |
| Lincoln: published insulated range | R-6.48 to R-9.05Manufacturer's published R-value terminology; no whole-door U-factor, installed performance or energy savings inferred.Source: Amarr Lincoln — product and resources · Construction / Design |
| Lincoln: per-configuration thermal mapping | Not documented in the checked sourceThe reviewed HTML gives a family range; exact model-to-rating mapping has not been verified.Source: Amarr Lincoln — product and resources · Construction |
These links open the manufacturer’s document or support page. Manuals are hosted by their issuer.
Filter the documents listed below by model or document type. A match is not confirmation of your unit’s revision or installed accessories; read the scope note before using a document.
3 of 3 listed documents shown.
Use the family-specific Brochures & Installation section. Revision applicability of individual downloads still requires checking.
Use the family-specific Brochures & Installation section. Revision applicability of individual downloads still requires checking.
Open the residential section and match the complete model code. The shared entry provides separate family references; it does not establish interchangeable products. Individual specification revisions still require checking.
Anderson prepared this independent reference from the listed sources. It is not the manufacturer’s official support site, an installation inspection or a product test. Current stock, parts availability and warranty entitlement are not established by a listing.
Garage Door Installation & Replacement: what an inspection or installation involves →
Share the equipment label and symptom. Availability is confirmed for the exact service address before scheduling. This reference does not establish a fault, part fitment, or repair availability for a particular model.
One Request. Three Simple Steps.
No need to leave this page. You can change your answers at any step.
Your request is sent to Anderson. Appointment timing and any visit charge are confirmed with you.
Request submitted
Your request has been accepted for delivery to Anderson. A team member must confirm availability before any appointment is booked.
Need service now? Call (203) 902-3902 to confirm availability.
From our customers
3 weeks ago
The service was fantastic- courteous, knowledgeable and honest.Excerpt from Google review
a month ago
Very very professional guys good jobs good service
3 months ago
Great worker
3 months ago
They replaced three garage door motors for me, and the service was excellent from start to finish.Excerpt from Google review
4 months ago
Very good service and very polite
4 months ago
Very good work, polite and flexible in scheduling appointments.
Reviews from Google. Rating and relative dates checked October 1, 2026. This is a dated snapshot, not a live feed.
Serving your home with pride
Call now to discuss the problem and check availability for your ZIP. The exact service address is confirmed before scheduling.
AI assistant · General guidance and service requests